| 2023 |
Singh, G., Brar, G.S., Singh, R. |
On Mechanical Properties of 3D-Printed Secondary Recycled Acrylonitrile Butadiene Styrene Composite for Silencer Application in Short-Range Gun |
Journal of Materials Engineering and Performance |
SCIE |
Q2 |
2.3 |
| 2023 |
Singh, P., Deepak, D., & Brar, G.S. |
Investigations on the effect of friction crush welding parameters in joining 6061 aluminium alloy to 304 stainless steel |
Journal of Mechanical Science and Technology |
SCIE |
Q2 |
1.810 |
| 2022 |
Frawaha, H.S., Deepak, D., & Brar, G.S. |
Investigation of a novel ultrasonically aided electrochemical magnetic abrasive machining process for SS316L |
The International Journal of Advanced Manufacturing Technology |
SCIE |
Q1 |
3.563 |
| 2021 |
Singh, R., Singh, I., Kumar, R., & Brar, G.S. |
Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability: Thermomechanical investigation |
Journal of Thermoplastic Composite Materials |
SCIE |
Q2 |
3.027 |
| 2021 |
Singh, H., Brar, G.S., Kumar, H., & Aggarwal, V. |
A review on metal matrix composite for automobile applications |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2021 |
Singh, P., Deepak, D., & Brar, G.S. |
Optical micrograph and micro-hardness behavior of dissimilar welded joints of aluminum (Al6061-T6) and stainless steel (SS 304) with friction crush welding |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2020 |
Frawaha, H.S., Deepak, D., & Brar, G.S. |
Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining |
Journal of Mechanical Science and Technology |
SCIE |
Q2 |
1.810 |
| 2020 |
Singh, H., Brar, G.S., Kumar, H., & Aggarwal, V. |
Characterization and sustainability of boron carbide reinforced 7075 Aluminum metal matrix composites |
Journal of Green Engineering |
Scopus |
Q4 |
- |
| 2020 |
Pandher, C.S., Singh, R., & Brar, G.S. |
Study of microhardness with different geometric shapes of pattern’s in the vacuum moulding |
Journal of Critical Reviews |
Scopus |
Q4 |
- |
| 2020 |
Farwaha, H.S., Deepak, D., & Brar, G.S. |
Microstructure and performance investigation of magnetic abrasive particles |
Journal of Critical Reviews |
Scopus |
Q4 |
- |
| 2020 |
Arora, H., Singh, R., & Brar, G.S. |
Numerical simulation on residual stresses of stainless steel SS-304 thin welded pipe |
Measurement and Control |
SCIE |
Q3 |
1.648 |
| 2020 |
Farwaha, H.S., Deepak, D., & Brar, G.S. |
Design and performance of ultrasonic assisted magnetic abrasive finishing combined with electrolytic process set up for machining and finishing of 316L stainless steel |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2020 |
Singh, P., Deepak, D., & Brar, G.S. |
Comparative evaluation of Aluminum and Stainless Steel dissimilar welded joints |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2020 |
Singh, P., Deepak, D., & Brar, G.S. |
Comparative evaluation of Aluminum and Stainless Steel dissimilar welded joints |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2020 |
Khundrakpam, N.S., Brar, G.S., & Devi, M.B. |
Optimizing the process parameters of ECM using Taguchi method |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2020 |
Arora, H., Singh, R., & Brar, G.S. |
On mechanical and morphological investigations of tungsten inert gas welded SS 304 thin pipe joints |
Measurement and Control |
SCIE |
Q3 |
1.648 |
| 2019 |
Farwaha, H.S., Deepak, D., & Brar, G.S. |
Process parameter optimization of ultrasonic assisted electrochemical magnetic abrasive finishing of 316L stainless steel |
Journal of Physics: Conference Series |
Scopus |
Q4 |
- |
| 2019 |
Arora, H., Singh, R., & Brar, G.S. |
Thermal and structural modelling of arc welding processes: A literature review |
Measurement and Control |
SCIE |
Q3 |
1.648 |
| 2019 |
Arora, H., Singh, R., & Brar, G.S. |
Prediction of temperature distribution and displacement of carbon steel plates by FEM |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2018 |
Singh, K.N., Brar, G.S., & Deepak, D. |
Genetic Algorithm approach for optimizing surface roughness on near dry EDM |
IOP Conference Series: Materials Science and Engineering |
Scopus |
Q4 |
- |
| 2018 |
Singh, K.N., Brar, G.S., & Deepak, D. |
A comparative study on machining performance of wet EDM, near dry EDM and powder mixed near dry EDM |
International Journal of Applied Engineering Research |
Scopus |
Q4 |
- |
| 2018 |
Brar, G.S. |
Optimization of machining parameters in dry EDM of EN 31 steel |
IOP Conference Series: Materials Science and Engineering |
Scopus |
Q4 |
- |
| 2018 |
Singh, H., & Brar, G.S. |
Characterization and investigation of mechanical properties of composite materials used for leaf spring |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2018 |
Khundrakpam, N.S., Brar, G.S., & Deepak, D. |
Grey-Taguchi optimization of near dry EDM process parameters on the surface roughness. |
Materials Today: Proceedings |
Scopus |
Q4 |
- |
| 2015 |
Brar, G.S., & Mittal, G. |
Impact of powder metallurgy electrode in electric discharge machining of H-13 steel |
Applied Mechanics and Materials |
Scopus |
Q4 |
- |
| 2014 |
Brar, G.S., & Singh, C.S. |
FEA of residual stress in cruciform welded joint of hollow sectional tubes |
Journal of Constructional Steel Research |
SCI |
Q1 |
4.349 |
| 2013 |
Brar, G.S., Hari, Y., & Williams, D.K. |
Fourier series analysis of A cylindrical pressure vessel subjected to axial end load and external pressure |
International Journal of Pressure Vessel and Piping |
SCIE |
Q2 |
2.56 |
| 2012 |
Brar, G.S., & Singh, G. |
FEA of residual stresses in butt welded type low carbon steel using MMAW technique |
Applied Mechanics and Materials |
Scopus |
Q4 |
- |
| 2006 |
Brar, G. S. |
Keeping the wheels turning [total productive maintenance] |
IEE Manufacturing Engineer |
Scopus |
Q4 |
- |
