| 2026 |
Himanshu Sah, Lalta Prasad |
Experimental assessment of thermo-hydraulics of elliptical tube heat exchanger with perforated hollow circular ring inserts. |
International Communications in Heat and Mass Transfer |
SCI |
Q1 |
6.4 |
| 2025 |
Hari Om Maurya, Gaurav Kumar, Lalta Prasad and Himanshu Bisaria |
On Mechanical, Thermal and Sliding Wear Characterization of Microwave-Cured Sisal-Banana Fiber/LLDPE Hybrid Composites |
Part L: Journal of Materials: Design and Applications |
SCIE |
Q2 |
2.2 |
| 2025 |
Himanshu Sah , Lalta Prasad, Sanjeev Kumar |
Experimental assessment and optimization of design parameters of thermo-hydraulic performance of heat exchanger tube using hollow elliptical swirl generators. |
International Communications in Heat and Mass Transfer |
SCI |
Q1 |
6.4 |
| 2025 |
Sanjeev Kumar, Lalta Prasad, Niraj Kumar Mishra, Narendra Gariya |
Thermogravimetric investigation and FEA study on mechanical properties of Grewia optiva/Basalt fiber reinforced hybrid polyester composites |
Journal of the Indian Chemical Society |
SCIE |
Q2 |
3.2 |
| 2024 |
Hari Om Maurya, Gaurav Kumar, Lalta Prasad and Himanshu Bisaria |
Thermo-Mechanical and Viscoelastic Behaviour of Microwave-Processed Sisal and Banana Hybrid Composite Laminates |
Journal of Materials Science |
SCIE |
Q1 |
3.2 |
| 2024 |
Kumar, V., Yadav, S. K., Kumar, A., Singh, N. K., & Prasad, L. |
Numerical study on effect of operating pressures on CRKEC-based two-stage ejector |
Archives of Thermodynamics |
SCIE |
Q3 |
0.9 |
| 2024 |
Hari Om Maurya, Gaurav Kumar, Lalta Prasad and Pranjal Gupta |
Development and Characterization of Microwave-Processed LLDPE based Sisal/Jute Hybrid Laminates |
Journal of Polymer Composites |
SCIE |
Q1 |
5.1 |
| 2024 |
Amit Kumar, Lalta Prasad, Virendra Kumar |
Thermodynamic evaluation of water-cooled photovoltaic thermal system with PCM-based thermal energy storage |
Sadhana Published by Indian Academy of Sciences Spinger. |
SCI |
Q1 |
1.6 |
| 2024 |
Pramod Prabhakar Bijlwan, Lalta Prasad, Anshul Sharma |
Analysis of mechanical properties and free vibrational characteristics of novel Grewia optiva/Basalt fiber reinforced hybrid polymer composites, |
Journal of Applied Polymer Science |
SCIE |
Q2 |
3.5 |
| 2023 |
Lalta Prasad, Pawan Kapri, Raj Vardhan Patel, Anshul Yadav, and Jerzy Winczek |
Physical and Mechanical Behavior of Ramie and Glass Fiber Reinforced Epoxy Resin-Based Hybrid Composites |
Journal of Natural Fibers, |
SCIE |
Q1 |
3.507 |
| 2023 |
Jatinder Garg, Kulwant Singh, Love Kumar, and Lalta Prasad |
Development of submerged arc welding flux from rice straw ash, |
Journal Materials and Manufacturing Processes, |
SCIE |
Q2 |
4.8 |
| 2023 |
Pramod Prabhakar Bijlwan, Lalta Prasad, Anshul Sharma, Manoj Kumar Gupta, Virendra Kumar |
Experimental study on the mechanical and hygroscopic properties of alkaline treated Grewia optiva / Basalt fiber reinforced polymer composites; |
Biomass Conversion and Biorefinery |
SCIE |
Q1 |
4.050 |
| 2023 |
Anant Prakash Agrawal, Virendra Kumar, Jitendra Kumar, Prabhu Paramasivam, Seshathiri Dhanasekaran, Lalta Prasad |
An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication; |
Heliyon |
SCIE |
Q2 |
3.776 |
| 2023 |
Pramod Prabhakar Bijlwan, Lalta Prasad, Anshul Sharma, Sanjeev Kumar |
Taguchi Optimized Sliding Wear Behavior and Hardness of Novel Grewia Optiva /Basalt Fiber Reinforced Hybrid Polyester Composite |
Journal of Applied Polymer Science |
SCIE |
Q2 |
3.051 |
| 2023 |
Bhupendra Kumar, Amit Joshi , Krishan Kant Singh Mer, Lalta Prasad, & Indradeep Kumar |
Tensile and Fracture Toughness behavior of Centrifugally Cast Al/Al2O3 Functionally Graded Materials |
Indian Journal of Engineering & Materials Sciences |
SCI |
Q2 |
0.615 |
| 2022 |
Sanjeev Kumar, Lalta Prasad, Pramod Prabhakar Bijlwan, Anshul Yadav |
Thermogravimetric analysis of lignocellulosic leaf based fiber reinforced thermosets polymer composites: an overview |
Journal of Biomass Conversion and Biorefinery |
SCIE |
Q2 |
4.050 |
| 2022 |
L. Prasad, A. Kumar, R. Jaiswal, A. Kumar, V. Kumar, A. Yadav |
Mechanical Properties of AA6061T6 and AA6351T6 plates joined by friction stir welding, |
Journal of Material Science & Engineering Technology |
SCIE |
Q3 |
1.034 |
| 2022 |
Lalta Prasad, Rahul Bairwan, Anshul Yadav, Anil Kumar, Virendra Kumar &Jerzy Winczek |
Evaluation of Physical, Mechanical, and Wear Properties of Jatropha Shell Powder Reinforced Epoxy Glass Fiber Composites |
Journal of Natural Fibers |
SCIE |
Q1 |
3.507 |
| 2022 |
Virendra Kumar, Anil Kumar, Surendra Kumar Yadav, Anshul Yadav, Lalta Prasad, Jerzy Winczek, |
Numerical Analysis on a Constant Rate of Kinetic Energy Change Based a Two-Stage Ejector-Diffuser System |
Journal of Mechanical Engineering |
Scopus |
Q3 |
- |
| 2022 |
Ripudam Singh Negi, Lalta Prasad, Anshul Yadav, Jerzy Winczek |
Physical and Mechanical Properties of Pinecone Scale Fiber/Vigna Mungo Powder Reinforced Polypropylene Based Hybrid Composites |
Journal of Natural Fibers, |
SCIE |
Q1 |
3.507 |
| 2021 |
Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Ashish Kumain, Anshul Yadav |
Experimental and numerical study on physico-mechanical properties and Taguchi's designed abrasive wear behavior of hemp/nettle-polyester hybrid composite |
Journal of Polymer Composites |
SCI |
Q2 |
3.531 |
| 2021 |
Lalta Prasad, Niteesh Kumar, Anshul Yadav, Anil Kumar, Virendra Kumar and Jerzy Winczek |
In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites |
Journal of Materials |
SCIE |
Q2 |
3.623 |
| 2021 |
Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Yadav and Jerzy Winczek |
Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites |
Journal of Polymers |
SCIE |
Q1 |
4.329 |
| 2021 |
Lalta Prasad, Vinod Singh, Raj Vardhan Patel, Anshul Yadav, Virendra Kumar & Jerzy Winczek |
Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials |
Journal of Natural Fibers |
SCIE |
Q1 |
5.323 |
| 2021 |
Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, and Anshul Yadav |
Physico-Mechanical Properties and Taguchi Optimized Abrasive Wear of Alkali Treated and Fly Ash Reinforced Himalayan Agave Fiber Polyester Composite; |
Journal of Natural Fibers |
SCIE |
Q1 |
5.323 |
| 2020 |
Lalta Prasad, Shiv Kumar, Raj Vardhan Patel, Anshul Yadav, Virendra Kumar and Jerzy Winczek |
, Physical and Mechanical Behaviour of Sugarcane Bagasse Fibre-Reinforced Epoxy Bio-Composites |
Journal of Materials |
SCIE |
Q2 |
3.623 |
| 2020 |
Lalta Prasad, Ashish Kumain, Raj Vardhan Patel, Anshul Yadav, and Jerzy Winczek |
Physical and Mechanical Behaviour of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites |
Journal of Natural Fibers |
SCIE |
Q1 |
5.323 |
| 2020 |
Lalta Prasad; Manish Upreti, Anshul Yadav, Raj Vardhan Patel, Virendra Kumar, Anil Kumar |
Optimization of process parameters during WEDM of EN‑42 spring steel |
SN Applied Sciences |
Scopus |
Q4 |
- |
| 2020 |
Sanjeev Kumar, Lalta Prasad, Sandeep Kumar, Vinay Kumar Patel |
Physico mechanical and Taguchi optimized abrasive wear behaviour of KOH/KMnO4/NaHCO3 treated Himalayan Agave fiber reinforced polyester composite, |
Journal of Materials Research Express, |
SCIE |
Q2 |
1.929 |
| 2019 |
Prabhat Chaurasia, Anil Kumar, Anshul Yadav, Praveen Kumar Rai, Virendra Kumar, Lalta Prasad |
Heat transfer augmentation in automobile radiator using Al2O3 water based nanofluid, |
SN Applied Sciences |
Scopus |
Q4 |
- |
| 2019 |
Lalta Prasad, Aruna Saini, Virendra Kumar |
Mechanical Performance of Jute and Basalt Fiber Geo-grid Reinforced Epoxy Hybrid Composite Material |
Journal of Natural Fibers |
SCIE |
Q1 |
5.323 |
| 2019 |
Sanjeev Kumar, Lalta Prasad, Sandeep Kumar, Vinay Kumar Patel |
Physico-mechanical and Taguchi-designed sliding wear properties of Himalayan agave fiber reinforced polyester composite |
Journal of Materials Research and Technology |
SCIE |
Q3 |
5.039 |
| 2019 |
Lalta Prasad, Gaurav Singh, Anshul Yadav, Virendra Kumar, Anil Kumar |
Properties of functionally gradient composites reinforced with waste natural fillers; |
Journal Acta Periodica Tehnologica, |
Scopus |
Q4 |
- |
| 2019 |
Ripudaman Singh Negi, Rajendra Singh Bisht, Raj K. Singh, and Lalta Prasad |
Physico-Mechanical and Antibacterial Properties of Pine Gum/Epoxy Composites with/without Silver Nanoparticles |
Journal of Macromolecular Materials and Engineering, |
SCI |
Q1 |
4.402 |
| 2018 |
L. Prasad, R. Khantwal |
Study on breaking load of single lap joint using hybrid joining techniques for alloy steel AISI 4140 and mild steel: Taguchi and Neural network approach |
Journal of Mechanical Engineering - Strojnícky časopis, |
Scopus |
Q4 |
- |
