| 2024 |
Pawan Kumar Rakesh, Rajesh Kumar, Abhishek Dixit, Satyam Singh Gurjar, Jayant Kumar |
Effect of mechanical fastening versus adhesively bonded joints of polymer composites on lap joint strength |
Journal of Advanced Manufacturing Systems |
Scopus |
Q4 |
1.4 |
| 2024 |
Pawan Kumar Rakesh, M.K. Gupta, J.N. Mahto, N. S. Rajput |
Effects of current intensities on material removal rate, electrode wear rate, and surface roughness of machining high carbon high chromium steel |
Material Science and Engineering Technology |
SCIE |
Q3 |
2.1 |
| 2024 |
Neel Kamal Gupta, Pawan Kumar Rakesh, Vikas Rastogi, Inderdeep Singh |
Process Parametric Optimization of Fused Deposition Modelling for Manufacturing of Acrylonitrile Butadiene Styrene Parts |
Journal of Micromanufacturing |
Scopus |
Q4 |
0.31 |
| 2024 |
Pawan Kumar Rakesh, Manoj Kumar Gupta, Inderdeep Singh, Nitesh Singh Rajput, Jitendra Nath Mahto |
Fatigue Strength of Drilled Glass Fiber/Epoxy Laminates for Bone Fracture Fixation |
Gazi University Journal of Science |
Scopus |
Q3 |
0.18 |
| 2024 |
Rajesh Kumar, Pawan Kumar Rakesh, Dungali Sreehari, Deepak Kumar, Tejas Pramod Naik |
Preparation, characterisation and properties of green composites from Pinus roxburghii fibre |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
SCIE |
Q2 |
2.4 |
| 2023 |
Vivek Bahuguna, Pawan Kumar Rakesh, Apurba Mandal, Deepak Kumar |
Characterisation of Gaina cocoon foam: A promising and eco-friendly alternative to synthetic materials |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
SCIE |
Q2 |
2.4 |
| 2012 |
PK Rakesh, Inderdeep Singh, D Kumar |
Compressive behavior of glass fiber reinforced plastic laminates with drilled hole |
Advanced materials research |
Scopus |
Q4 |
0.5 |
| 2012 |
Rakesh P.K, Singh I, Kumar D. |
Flexural Behavior of Glass Fiber Reinforced Plastic Laminates with Drilled Hole |
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications |
SCIE |
Q2 |
2.9 |
| 2012 |
Rakesh P.K, Singh I, Kumar D |
Drilling of Composite Laminates with Solid and Hollow Drill Point Geometries |
Journal of Composite Materials |
SCIE |
Q2 |
2.9 |
| 2010 |
Kishore R. A, Tiwari R, Rakesh P.K, Singh I, Bhatnagar N |
Investigation of Drilling in Fiber Reinforced Plastics using Response Surface Methodology |
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture |
SCI |
Q2 |
2.6 |
| 2012 |
S Kumar, SR Chauhan, PK Rakesh, Inderdeep Singh, JP Davim |
Drilling of Glass Fiber/Vinyl Ester Composites with Fillers |
Materials and Manufacturing Processes |
SCI |
Q1 |
4.783 |
| 2010 |
PK Rakesh, Inderdeep Singh, D Kumar |
Failure prediction in glass fiber reinforced plastics laminates with drilled hole under uni-axial loading |
Materials & Design |
SCI |
Q1 |
9.417 |
| 2010 |
A Agarwal, S Garg, PK Rakesh, I Singh, BK Mishra |
Tensile behavior of glass fiber reinforced plastics subjected to different environmental conditions |
Indian Journal of Engineering and Materials Sciences (IJEMS) |
SCI |
Q3 |
0.881 |
| 2019 |
Gupta Manoj Kumar and Pawan Kumar Rakesh |
Characterization of pine needle ash particulates reinforced surface composite fabricated by friction stir process |
Mater. Res. Express |
SCIE |
Q2 |
2.025 |
| 2021 |
Lalit Ranakoti, Pawan Kumar Rakesh, Brijesh Gangil |
Role of Wood Flour on Physical and Mechanical Properties in Polymer Matrix CompositesA Critical Review |
Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials |
Scopus |
Q4 |
0.8 |
| 2021 |
Adarsh Chaturvedi, Lalit Ranakoti, Pawan Kumar Rakesh*, Niraj Kumar Mishra |
EXPERIMENTAL INVESTIGATIONS ON MECHANICAL PROPERTIES OF WALNUT SHELL AND PINE NEEDLE ASH POLYLACTIC ACID BIOCOMPOSITES |
Compos. Theory Practice |
Scopus |
Q4 |
0.8 |
| 2023 |
Rajesh Kumar , Pawan Kumar Rakesh , and Dungali Sreehari |
INVESTIGATION ON PHYSICO-CHEMICAL, MECHANICAL AND THERMAL PROPERTIES OF EXTRACTED NOVEL PINUS ROXBURGHII FIBER |
Journal of Natural Fibers |
SCI |
Q1 |
3.507 |
| 2023 |
Shaurya Bhatt, Deepak Joshi, Pawan Kumar Rakesh, Anoop Kant Godiyal |
Advances in additive manufacturing processes and their use for the fabrication of lower limb prosthetic devices |
EXPERT REVIEW OF MEDICAL DEVICES |
SCI |
Q1 |
3.1 |
| 2023 |
Mayank Pokhriyal, Pawan Kumar Rakesh, Sanjay Mavinkere Rangappa, Suchart Siengchin |
Effect of alkali treatment on novel natural fiber extracted from Himalayacalamus falconeri culms for polymer composite applications |
Biomass Conversion and Biorefnery |
SCI |
Q1 |
4.0 |
| 2023 |
Mayank Pokhriyal · Pawan Kumar Rakesh |
Processing and characterization of novel Himalayacalamus falconeri fber reinforced biodegradable composites |
Biomass Conversion and Biorefnery |
SCI |
Q1 |
4.0 |
| 2023 |
Rajesh Kumar · Pawan Kumar Rakesh · Dungali Sreehari · Deepak Kumar · Tejas Pramod Naik |
Experimental investigations on material properties of alkali retted Pinus Roxburghii Fiber |
Biomass Conversion and Biorefinery |
SCI |
Q1 |
4 |
| 2023 |
Jayant Kumar, Yashpal Singh, Tejas Naik, Ram Singh Rana, Pawan Kumar Rakesh & Inderdeep Singh |
Adhesive joining behaviour of banana/bagasse/epoxy composites with diferent joint designs |
Biomass Conversion and Biorefnery |
SCI |
Q1 |
4.0 |
| 2023 |
Jayant Kumar, Yashpal Singh, Pawan Kumar Rakesh, Inderdeep Singh, J Paulo Davim |
The Impact of Hole Diameter on the Molded and Drilled Holes in Jute-Fiber-Reinforced Epoxy Composites |
Journal of Composite Science |
Scopus |
Q2 |
3.3 |
| 2022 |
Lalit Ranakoti, Brijesh Gangil, Pawan Kumar Rajesh, Tej Singh, Shubham Sharma, Changhe Li, R.A. Ilyas, Omar Mahmoud, |
Effect of surface treatment and fiber loading on the physical, mechanical, sliding wear, and morphological characteristics of tasar silk fiber waste-epoxy composites for multifaceted biomedical and engineering applications: fabrication and characterizations |
Journal of Materials Research and Technology |
SCI |
Q1 |
6.4 |
| 2019 |
Lalit Ranakoti; Manoj Gupta; PK Rakesh, |
Analysis of mechanical and tribological behavior of wood flour filled glass fiber reinforced epoxy composite |
Mater. Res. Express |
SCI |
Q2 |
1.62 |
| 2020 |
Lalit Ranakoti, PK Rakesh |
Physio-mechanical characterisation of tasar silk waste/jute fiber hybrid composites, |
Composites Communications |
SCI |
Q1 |
6.6 |
| 2021 |
Jayant Kumar, Vipin Kumar, Inderdeep Singh, and PK Rakesh |
Joining behavior of polymeric composites fabricated using agricultural waste as fillers, |
Journal of Adhesion Science and Technology |
SCI |
Q2 |
2.07 |
| 2021 |
Ranakoti, L., Rakesh, P.K., Gangil, B., |
Effect of Tasar silk waste on the mechanical properties of Jute/Grewia optiva fibers reinforced epoxy laminates |
Journal of Natural Fibers |
SCI |
Q2 |
5.3 |
